Russound R1250MC amplifier review

amplifier — Wed, 09 May 2012 23:10:31 +0000

Russound R1250MC amp is a 12-channel power amplifier ideal for use as the main amplifier in home theater and distributed audio systems. The 12 channels are arranged in pairs to provide amplification for six stereo zones.
The R1250MC amplifier provides an array of useful features such as autosensing line inputs, bridged mono operation, independent zone triggering, bus inputs and multiple speaker outputs per zone to meet a wide variety of applications and configurations.

Russound R1250MC amplifier is rated at 50 watts per channel into 8 ohms and 80 watts per channel into 4 ohms. With a zone’s mode switch set in the Bridge Mono position, both channels in the zone are combined for a mono output of 140 watts into an 8-ohm load. All this power is supplied by three high-output toroidal transformers. Each amplifier output channel includes robust protection circuitry for safety and reliability under extreme circumstances.
R1250MC Features

Wide application use Ideal for home theater and six-zone distributed audio systems
Adaptable Zones are bridgeable to create flexible power configurations
Reliable Robust circuitry designed for stability under demanding loads
Flexible Installs with either attached feet or included rack ears
Efficient Autosensing line inputs activate amplifier zones upon detecting audio signals

Russound R1250MC amplifier Specifications
Single-zone maximum output power
(0.1% THD+N; f=1 kHz)
50 W per channel, 2 channels at 8 ohms
80 W per channel, 2 channels at 4 ohms
140 W at 8 ohms, 2 channels bridged

All zones continuous output power
35 W per channel, 12 channels at 8 ohms
50 W per channel, 12 channels at 4 ohms
100 W at 8 ohms, each zone bridged

Distortion
<0.05% THD+N from 20 Hz to 20 kHz

Signal-to-noise ratio
>100 dB

Frequency response
20 Hz to 20 kHz +/-0.3 dB

Input sensitivity
70 mV for 1 W at 8 ohms
500 mV for 50 W at 8 ohms

Line input impedance
47 kilohms

Voltage gain
32 dB

Delay time
0.5 to 4.5 minutes

Input trigger
12 VDC 10 kilohms

Output trigger
12 VDC 100 mA

Power requirements
North America
120 VAC 60 Hz 7 A
Fuse rating: T15AL 250 V
Europe
230 VAC 50 Hz 4 A
Fuse rating: T10AL 250 V

Dimensions:
17″ W x 5.875″H x 16.5″D
(43 x 15 x 42 cm)
3U rack space

Weight
48.9 lb (22.2 kg)
Russound R1250MC amplifier photos

NAD M3 amp review specs NAD M3 amplifier review: is a Dual mono integrated amplifier...
T600-4 600 Watt 4-Channel Amplifier The T600-4 Rockford Fosgate 600W amplifier offers the perfect balance...
XPA2100 Car Audio Amplifier The Two-Channel Dual Xpa2100 Mosfet Amplifier Provides No-Holds-Barred Mobile Audio...

Car Amplifiers » russound amplifiers

Russound R1250MC amplifier review